Reinventing New York's Woolworth Building | The B1M

387K+ views   |   11K+ likes   |   138 dislikes   |  
00:00   |   Feb 20, 2019


Reinventing New York's Woolworth Building | The B1M
Reinventing New York's Woolworth Building | The B1M thumb Reinventing New York's Woolworth Building | The B1M thumb Reinventing New York's Woolworth Building | The B1M thumb


  • When it first opened in 1913, the 241 metre Woolworth Building in New York City was the
  • tallest skyscraper in the world.
  • Providing 57 storeys of commercial office space within its neo-gothic inspired design,
  • the building was seen as a monument to capitalism and quickly became dubbed the “Cathedral of Commerce”.
  • Though it lost the title of the world's tallest tower in 1930, the Woolworth Building remained
  • an iconic symbol of New York throughout the 20th Century
  • gaining national landmark status in 1966.
  • However, as the 21st Century dawned and commercial office environments evolved, the tower’s
  • appeal became limited by its own design.
  • In response, developers looked for ways to reinvent
  • this iconic structure, retaining its heritage whilst making it viable in a new age.
  • When skyscrapers first rose to prominence, they were widely seen as symbols of corporate
  • power with executive management occupying the uppermost floors in a literal statement
  • of hierarchy that continued for much of the 20th Century.
  • But in the early 2000s, corporations began to move away from this vertical segregation
  • of departments and instead embraced more open layouts where employees could interact and
  • engage with their teams.
  • While the original design of the Woolworth Building was revolutionary for its time, its narrower
  • upper floors were not able to meet the demands of modern day commercial tenants seeking these
  • new, open plan layouts.
  • In 2012, as the world recovered from the Global Financial Crisis of 2008
  • Alchemy Properties purchased the top 30 storeys of the Woolworth Building
  • with plans to convert them into luxury residential apartments
  • a commodity that was becoming highly sought after in Manhattan.
  • Consisting of 33 units – including a five storey “Castle in the Sky” penthouse
  • worth USD $110 million –
  • the Woolworth Residences were set to become the most expensive in the
  • Downtown area
  • While numerous high-rise residential projects were under development across the city – primarily
  • in the Midtown area that would later become known as “Billionaire’s Row”
  • the Woolworth Building stood out for its historic status and intricate neo-Gothic architecture
  • that couldn’t be replicated elsewhere.
  • However, the unique structure presented the development team with unique challenges that
  • other new build schemes were able to avoid.
  • The highly built-up surroundings and ornate design of the Woolworth Building meant that
  • erecting a crane adjacent to the tower or on its roof was simply not possible.
  • Concurrently, the lower 28 levels of the building – occupied by commercial office tenants
  • were to remain in use throughout the conversion works on the residences.
  • To overcome these challenges, the project team had to ensure that all materials and
  • equipment specified could fit within the internal lift shafts of the tower, before installation
  • at their intended floor.
  • With the Woolworth Residences occupying the upper levels of a commercial building, the
  • need to separate residents from office tenants was a primary concern for developers.
  • Before works to create the apartments could commence, suitable access had to be secured.
  • Whilst a dedicated new entrance lobby off Park Place was one step, transporting residents
  • upwards, proved considerably more complex.
  • The highest office floor on level 28 of the tower was only accessible by three elevators,
  • all of which were housed within shafts that extended up to the 49th Floor.
  • These needed to be moved to create dedicated access for the residences and separate access
  • for the offices, avoiding the need for elevator cars to be shared between office tenants and residents.
  • However, with the commercial areas of the building remaining occupied during renovation
  • works on the upper levels, only one elevator shaft could be taken out of service at any
  • one time.
  • As such, all work to move the elevators and their associated mechanical plant had
  • to be undertaken out of hours when the offices were not occupied.
  • As early elevator systems were much slower and smaller than their modern-day equivalents,
  • many older skyscrapers typically have an oversupply of elevator shafts, as compared to new structures.
  • Following numerous elevator upgrades throughout its life, the Woolworth Building had a number
  • of vacant shafts.
  • However, the narrow dimensions of these shafts and their location on the tower’s floor
  • plate did not work efficiently with the proposed residential layout of the building.
  • To overcome this, a 4.9-metre-wide disused boiler flue – which ran the entire height
  • of the building – was repurposed as the residential elevator shaft, allowing for larger
  • cars and access from the basement car park to the highest floor.
  • Works to remove the 13mm thick steel flue were carried out by a worker being lowered
  • into the duct and burning away pieces of steel from within, before lowering those pieces
  • down through the shaft.
  • In order to accommodate the new, higher speed elevators for the residences, deeper elevator
  • pits were required to allow for overruns in the shafts.
  • To construct these
  • 4.9-metre deep holes were excavated in the building’s basement, extending 2.4 metres below the waterline.
  • To avoid soil collapse and water quickly filling the pits during excavation, grout was first
  • injected into the soil to stabilise it. Once complete the pits were waterproofed and lined
  • with cement to prevent leaks.
  • With its conversion from commercial to residential use, a number of additional services were
  • required on the upper floors of the Woolworth Building, independent from those for the office units.
  • Making use of the disused elevator shafts, engineers were able to bring all services
  • up from street level to the 29th floor, bypassing the commercial levels before branching off
  • to each residence.
  • To provide sufficient air intake and exhaust for the tower, the four decorative tourelles
  • that surround its summit were adapted to house mechanical shafts which could service the
  • upper floors.
  • Crowning the Woolworth Residences is the aptly named Pinnacle Penthouse.
  • Spanning the five highest floors of the tower this “Castle in the Sky” is unlike any
  • other New York apartment.
  • With three bedrooms, five bathrooms, a private elevator, library, media room and private
  • observation deck across 9,710 square feet of space
  • the penthouse was marketed at USD $110 million
  • more than double the previous record for the most expensive downtown residence.
  • To create this luxurious space and meet New York’s natural light and air requirements,
  • Alchemy needed to secure permission from the Landmarks Preservation Committee to expand
  • existing windows and add six additional penetrations.
  • These adaptations – along with the removal of half of the 54th floor to create a double
  • height entertainment space known as “the Great Room” and additional floor penetrations
  • to accommodate the private elevator – meant that the summit of the tower required extensive
  • structural support to continue resisting lateral loads.
  • In response, engineers introduced bracing around all new openings while the entire 54th
  • and 55th storeys were strengthened with additional bracing around their perimeter.
  • As our living habits, desires and building regulations continue to evolve, it is tempting
  • to overcome challenging issues with outdated building stock simply by demolishing such
  • structures.
  • But with growing respect for our built heritage and increasing awareness of adaptive reuse
  • for large structures, the Woolworth Building stands as a prime example of how history can
  • not only be retained but brought forward into a new age.
  • If you enjoyed this video and would like to get more from the definitive video channel
  • for construction, subscribe to The B1M.

Download subtitle

Download video & audio

Right click on one of the buttons above and choose "Save Link As..." to download video


Once the world's tallest skyscraper, Manhattan's Woolworth Building has been reinvented for a new age. For more by The B1M subscribe now: http://ow.ly/GxW7y

Read the full story on this video, including images and useful links, here: http://www.theb1m.com/video/reinventing-new-yorks-woolworth-building

Images courtesy of the New York Public Library, United States Library of Congress Prints and Photographs Division, Google Earth, Andrew C Nelson, Alchemy Properties, Sarah Jacobs, Travis Mark, Keymur Khamar, Williams NY, Arun Sundar, Bob Jagandorf, Stephen Garone, Arman Dzidzovic, Brian Zak, Viewing NY, Ralph D'Angelo, Shaun Zenfolio, Unico, Penn State Library Pictures Collection, Evan Bindleglass, SLCE Architects, Craig Gibson, Richard Perry and Tribeca Citizen.

The B1M merch store - https://theb1m.fanfiber.com/en

View this video and more at - https://www.TheB1M.com
Follow us on Twitter - http://www.twitter.com/TheB1M
Like us on Facebook - http://www.facebook.com/TheB1M
Follow us on LinkedIn - https://www.linkedin.com/company/the-b1m-ltd
Follow us on Instagram - http://instagram.com/theb1m/

We welcome you sharing our content to inspire others, but please be nice and play by our rules: http://www.theb1m.com/guidelines-for-sharing

Our content may only be embedded onto third party websites by arrangement. We have established partnerships with domains to share our content and help it reach a wider audience. If you are interested in partnering with us please contact Enquiries@TheB1M.com.

Ripping and/or editing this video is illegal and will result in legal action.

© 2019 The B1M Limited | Share + Inspire