LOADING ...

Create figures with 3d pen (VS Half a year ago)

1M+ views   |   60K+ likes   |   649 dislikes   |  
00:00   |   Sep 05, 2019

Thumbs

Create figures with 3d pen (VS  Half a year ago)
Create figures with 3d pen (VS  Half a year ago) thumb Create figures with 3d pen (VS  Half a year ago) thumb Create figures with 3d pen (VS  Half a year ago) thumb

Transcription

  • Hi I'm Sanago, the master of 3D pen
  • Today, I'm going to try to recreate the bike-riding figure
  • that I made half a year ago
  • Making the same figure
  • helps me grasp how much my skills have improved.
  • This is the figure of my favorite movie
  • but actually, it got broken
  • so I decided to make another one
  • Make two bicycle frames like these
  • then attach one to another,
  • making them face their bumpy sides
  • I'm going to put the frames aside for a moment
  • Cover filaments with a metal bar
  • to make a perforated tube
  • Be careful when you use a knife
  • Make the front parts of the frame
  • when you're done with the tube.
  • Similarly, make two same pieces
  • and combine them into one.
  • Although it's been half a year,
  • At least, my skill to make frames isn't rusty.
  • The front frames will be connected to handlebars
  • Make a stick using the filaments, and knead the surface evenly
  • Make sure you wear gloves
  • The filament is hotter than your passion
  • Attach the stick to the frame
  • Make handlebars and attach them too
  • smoothen it to look good
  • and connect it to the frame that I put aside
  • Finish the rest of the frames
  • Then, make two more covers for this part.
  • Making a bicycle is more complicated than you'd think
  • Even if I was not making exactly the same as a real bicycle,
  • to give a feeling of the real bicycle,
  • like pedaling makes the wheels spin,
  • I grappled
  • it was the gear wheels that spun the wheels of the bicycle I made before
  • so I made the gear wheels again
  • but it didn't work
  • I put aside
  • I used a rubber band this time
  • Make bicycle cranks and axles
  • after Inserting like this
  • connect with the rubber band and cover it
  • Wheels should be the most sophisticated.
  • If the wheels are crooked or out of the center,
  • You will be in big trouble
  • In fact, It isn't that big
  • but it will take a long time to make them again
  • Time is precious
  • No matter how much money you give,
  • you can't turn back the wasted time
  • The wheels got better than the last time
  • Drill a hole at the center
  • It spins well
  • Now, put a wheel on the frame
  • Connect the rubber band and the pedals to the rear wheel
  • If it spins well, it means the bicycle is almost done
  • Now, I'm going to make Shin Chan's dad
  • The reason that I felt there was something lacking in the last figure is
  • that the figure was flat like Egyptian murals
  • I will make this one in three dimensions
  • Build the frameworks and fill the sides roughly
  • and anyone can make a figure easily
  • Make other body parts in the same way
  • To let the legs move
  • I made a spindle in the knee joint
  • Make arms and legs
  • Put a seat on it
  • Fix the legs on the pedals after seating the body
  • Now I'm going to make its head
  • The way to make it is the same
  • Build the frameworks
  • Fill the sides
  • smoothen it
  • smoothen it more delicately
  • smoothen it more and more and more delicately
  • Make eyebrows
  • Cut a thinly stretched filament and stick it on the eyes
  • Use a lighter to stick the thicker eyebrows
  • The head will be completed
  • after finishing the hair and making his hat
  • Although making the head part seems easy,
  • it actually took 2-3 hours
  • But making something that I like is fun (ugh tiring)
  • After smoothening the surface all around
  • attach the head to the body.
  • Making something with 3D pen takes a lot of patience
  • If you give work a lick and a promise you can do faster and simpler
  • but the result must not be satisfying
  • So does life
  • Life is a mudguard
  • Attach the well-made mudguard to the bicycle
  • This is life
  • The way to make Shin Chan is the same
  • building
  • filling
  • smoothening
  • vacuuming
  • making arms and legs
  • attaching
  • playing with Nago
  • This is the most difficult one
  • The first thing Nago does is
  • spawling out
  • Because the workbench is messy
  • and I'm doing dangerous work
  • Put Nago aside
  • continue to work
  • Attach the chair that I made before to the bicycle
  • Scorch the Shin Chan's butt
  • and fix it on the chair
  • After finishing the details and decoration
  • the figure will be completed
  • I also added a basket that I forgot last time
  • Using the battery, Charging socket, switch, and motor
  • I will make the bottom
  • Make the base with acrylic plate
  • I'm going to make a belt using Tycon 3D pen for children
  • Because the 3D pen for children has a low melting point
  • it is safer
  • and because the filament from the pen is bendable
  • it has various uses
  • After connecting the belt and fixing the figure
  • the bike-riding figure
  • complete
  • I'll be back with a new entertaining video
  • Thank you
  • It was Sanago

Download subtitle

Download video & audio

Right click on one of the buttons above and choose "Save Link As..." to download video

Description

Create figures with 3d pen (VS Half a year ago)