LOADING ...

Building Los Angeles' Earthquake-Proof Bridge | The B1M

192K+ views   |   6K+ likes   |   85 dislikes   |  
05:50   |   Nov 28, 2018

Thumbs

Building Los Angeles' Earthquake-Proof Bridge | The B1M
Building Los Angeles' Earthquake-Proof Bridge | The B1M thumb Building Los Angeles' Earthquake-Proof Bridge | The B1M thumb Building Los Angeles' Earthquake-Proof Bridge | The B1M thumb

Transcription

  • Los Angeles’ Sixth Street viaduct is one of the most well-known bridges in the United States.
  • Made famous by appearances in countless movies, TV shows, commercials and music videos
  • – the 1,066-metre-long structure was an engineering marvel when first constructed in 1932.
  • Making use of an on-site plant to produce concrete during construction, it was later
  • discovered that the concrete developed had a high alkali content.
  • This lead to alkali-silica reactions taking place
  • and cracks forming throughout the structure.
  • Though the bridge underwent numerous costly restoration attempts over the years, no permanent
  • solution to its problems was ever found.
  • In 2004 a study of the structure revealed that it was seismically unstable and had a
  • 70% chance of collapse during an earthquake in the next 50 years.
  • With the bridge spanning the Los Angeles River, the 101 freeway, the I-5, and numerous railyards
  • and local streets, Los Angeles’ authorities had no choice but to mark the historic structure
  • for demolition and replace it with a bridge that could stand for 100 years in the face
  • of LAs strongest earthquakes.
  • After an international design competition in 2012, Michael Maltzan Architecture’s
  • design dubbed the “Ribbon of Light” was chosen to replace the Sixth Street viaduct structure.
  • The new bridge features 10 pairs of illuminated concrete arches that pay homage to the earlier
  • structure, while enabling longer spans and fewer ground supports.
  • This reduces the number of points that can be damaged in the event of an earthquake and
  • opens-up development opportunities beneath the bridge.
  • Work to demolish the existing viaduct began in February 2016 and an estimated 37,000 cubic
  • metres of concrete and 4,200 tonnes of steel were removed over the subsequent nine months.
  • With the original structure removed, work began on the new bridge and, in December 2017,
  • erection of the falsework that will support the new structure during its construction commenced.
  • To support the arches and create the bridge’s unique “Y Bents”, prefabricated falsework
  • is being trucked-in from as far away as Indiana and Toronto.
  • As concrete gives off heat as it cures, liquid nitrogen is poured into the concrete mixers
  • during the summer months to control the temperature of the mix and prevent it from curing too
  • quickly in the Los Angeles heat
  • which could lead to cracks forming on the finished structure.
  • With the arch structures complete, the new road deck will be suspended by cables from
  • these concrete structures.
  • With Los Angeles located in an area of high seismic activity, the city has developed some
  • of the world’s most stringent building codes.
  • To ensure that the new bridge remains standing in the event of a severe earthquake, engineers
  • have worked to exceed the latest seismic safety codes.
  • Along with its deep foundations and reinforced concrete arch design, the columns of the bridge
  • have been fitted with seismic isolation bearings at their midpoints.
  • The design of these bearings consists of three main parts – with each element able to separate
  • and break free from the other once certain thresholds are reached.
  • These bearings allow each of the columns of the bridge to move up to 76cm (30 inches)
  • during an earthquake event, with the bearings – rather than the bridge – absorbing the
  • majority of the quake’s energy.
  • When the shaking stops, the internal concave shape of the bearings allow them to re-centre
  • themselves and return to the shallowest point within the bearing.
  • By fitting the bridge with 26 of these isolation bearings – most of which have a diameter
  • of over 2 metres (around 6.5 feet) – the bridge should be able to provide a high level
  • of protection during a seismic event.
  • When complete in 2020, the new Sixth Street viaduct will serve as a vital link in LA’s
  • vast road network while opening-up a large area beneath its structure to the wider community
  • – where 12 acres of new parkland, art installations, and other community facilities are planned
  • to reinvigorate the space.
  • At a cost of USD $428M – the largest bridge project in the city's history, and with
  • its impressive architectural design that nods to the past whilst insulating the structure
  • against seismic threats in the future, the new viaduct is firmly on its way to becoming
  • an icon of Los Angeles.
  • If you enjoyed this video and would like to get more from the definitive
  • video channel for construction,
  • subscribe to The B1M.

Download subtitle

Download video & audio

Right click on one of the buttons above and choose "Save Link As..." to download video

Description

Los Angeles' authorities are replacing the iconic Sixth Street viaduct with an impressive earthquake-proof structure. For more by The B1M subscribe now: http://ow.ly/GxW7y

Read the full story on this video, including images and useful links, here: http://www.theb1m.com/video/building-los-angeles-earthquake-proof-bridge

Images courtesy of the [US] Library of Congress, University of Southern California Digital Library, Google Earth, Elizabeth Daniels, Michael Matlzan Architecture, AECOM, Safdie Rabines Architects, City of Los Angeles Bureau of Engineering, Weldon Brewster, Joe Linton, Prageeth S. L. and the United States Geological Survey (USGS).

The B1M merch store - https://theb1m.fanfiber.com/en

View this video and more at - http://www.TheB1M.com
Follow us on Twitter - http://www.twitter.com/TheB1M
Like us on Facebook - http://www.facebook.com/TheB1M
Follow us on LinkedIn - https://www.linkedin.com/company/the-b1m-ltd
Follow us on Instagram - http://instagram.com/theb1m/

We welcome you sharing our content to inspire others, but please be nice and play by our rules: http://www.theb1m.com/guidelines-for-sharing

Our content may only be embedded onto third party websites by arrangement. We have established partnerships with domains to share our content and help it reach a wider audience. If you are interested in partnering with us please contact Enquiries@TheB1M.com.

Ripping and/or editing this video is illegal and will result in legal action.

© 2018 The B1M Limited | Share + Inspire